Advanced Serial Port Terminal is a must-have tool for every developer and programmer. This session-based multi-purpose application lets you connect to any serial port device to check, troubleshoot or debug its work and connection. This terminal is much more functional than standard Windows Terminal, as it is able to send/receive various types of data (ASCII string, binary, octal and hexadecimal) over a serial line, redirect input/output data streams into a specified file, troubleshoot and test modem settings, etc.
HW VSP is a software driver that adds a virtual serial port (e.g. COM5) to the operating system and redirects the data from this port via a TCP/IP network to another hardware interface, which is specified by its IP address and port number. HW VSP3 support even NT Services and 64 bit Windows 8 .
HW Virtual Serial Driver is intended primarily for devices produced by HW group, although it can be used for free as a universal driver that creates a virtual remote serial port, which redirects data to a predefined TCP/IP address and port.
In special applications (e.g. involving GPRS devices), the PC with the HW VSP driver can be set to operate in TCP Server mode, enabling the remote device to initialize the connection by sending any data to the remote port. Upon receiving RS-232 data, the converter establishes a connection with the PC and passes the data to the virtual COM port. Therefore, the scenario very closely resembles behavior of a real serial port.
When using HW VSP together with recommended devices produced by HW group, it is possible to change connection speed, parity, and other communication parameters (as well as to control any digital outputs and inputs) remotely on the fly via the RFC-2217 protocol, thus achieving a true remote serial port behavior.
In the previous version, HW VSP was fully transparent to the client software and did not restrict the communication flow in any way. Hence, the client SW had to send the data to the serial port using a defined communication speed, or use flow control (handshake). Otherwise, data were sent to the Ethernet / Internet with the maximum speed possible, often in the 10 Mbps range. When the buffers in VSP filled up, data started to be thrown away. Now, it is possible to enable the Strict Baudrate Emulation option in the Settings tab to ensure that VSP communicates with the client SW using the speed that is currently selected for the port.
If you have the software, which works with some device connected to COM port and you want to capture all the data that goes to and from the port, then AVSD OEM is what you need. Just create one virtual port and tell the application to use it. Now you can monitor all data that application writes to the port and redirect it to the real COM port. And vice versa, you monitor all data coming from device and redirect it to the virtual port.With AVSD OEM you can:Create your_protocol-to-serial abstraction.Create virtual platform and emulator plugins.Create usb2serial, bluetooth2serial, IrDa2serial adapters. Informations Status: Evaluation (time-limit)Source: N/Aprice: $472Size: 520kB Platforms: C2k6, CB6, D2005, D2006, D7
In Serial Port ActiveX you will find diverse methods to read/write to and from serial ports, plenty of properties for advanced configuration of serial ports as well as the complete range of events to control them. Integrating Serial Port ActiveX in your own software is quite easy thanks to sample code for major development environments that is bundled with our component. . Informations Status: With Nag-ScreenSource: Noneprice: $199.95Size: 3 706kB Platforms: C2k10, C2k6, C2k7, C2k9, CB3, CB4, CB5, CB6, CBXE, CBXE2, CBXE3, D2005, D2006, D2007, D2009, D2010, D3, D4, D5, D6, D7, DXE, DXE2, DXE3
One of the system devices that you often need to support is a Serial Port. There are numerous lab instruments, protection gadgets and other inventory that can be connected via a COM port. Instead of spending weeks or even months for API coding, you could use a ready-made ActiveX component in your program. We recommend you give Serial Port Control from FabulaTech a try.Serial Port Control is an inexpensive, royalty-free, ActiveX component. You can use it with any ActiveX-enabled development environment, such as Visual C++, Visual Basic, Delphi, etc. Just put it on a form and you have all the functionality you need to access a serial port, either physical or virtual.Serial Port Control automatically enumerates all the ports available in the system. You just need to select the port name you wish to work with. The event driven architecture of this component is a snap to use. You don't have to check ports periodically in order to find if there is new data available for reading from a port. Simply define a function in your program that will be triggered automatically by the appropriate event and process the data.Despite its low cost, the component is royalty-free. There are no hidden fees and you are free to distribute it together with your own software. Informations Status: Trial (work while IDE is running)Source: Noneprice: $99.95Size: 543kB Platforms: C2k6, CB3, CB4, CB5, CB6, D2005, D2006, D3, D4, D5, D6, D7
Some of the features are:Allows to monitor and edit serial data streams directly from your application;Unique ActiveX Control - no need to use additional software for monitoring;Wide selection of supported events, methods and properties;Control lines support (DTR, RTS, CTS, RTS);No reboot required during installation and implementation;Usage examples for Microsoft VC++ and Microsoft Visual Basic included. Informations Status: With Nag-ScreenSource: On purchase/registrationprice: $299.95Exe demo: includedSize: 1 167kB Platforms: C2k6, CB5, CB6, D2005, D2006, D6, D7
This is list of basic features:SynaSer is not components, but only classes and routines. Not needed any installation.Working under Windows (Delphi or C++Builder) and under Linux (Kylix).Support for communicating on serial ports in blocking (synchronous) mode.Supported is high speed of communication (about few megabytes per second).Consume very low CPU time.Supported is same communication mechanism as used in Synapse TCP/IP library.Can lock serial port under Linux (like Windows do it).Support for software and hardware handshake.You may open any COM port, if exists in you system (i.e. COM156).Support for RTS driven communication (good for RS485 convertors, etc).Option for detect device presence before each data transmission. Informations Status: Fully functionalSource: IncludedSize: 40kB Platforms: C2k6, CB3, CB4, CB5, CB6, D2, D2005, D2006, D3, D4, D5, D6, D7
The event-driven architecture provides the highest possible performance and allows all the tools to run in the background.Advanced class object structure.Advanced but easy to use design interface.Optimized event-driven architecture.Provides the highest possible performance.Supports all important transfer protocols.Components to build advanced comport servers.Easy to use with any type of serial hardware.Links directly to your EXE, no runtime.Built-in support for XModem, YModem and ZModem protocols.Handles COM ports > 9 and also virtual COM ports (mapped on USB RS485 devices for example).TVaTerminal component, providing a codeless terminal for asynchronous communications.TVaTerminal supports an extendable emulation interface.TTY emulation component and simple ANSI color sequence handling emulation component.TVaDisplay component to visualize modem status. Informations Status: Trial (work while IDE is running)Source: On purchase/registrationprice: $75Size: 941kB Platforms: D7, C2k6, C2k7, D2006, D2007, C2k9, D2009, C2k10, D2010, CBXE, DXE, C10.1, D10.1, CBXE2, DXE2, CBXE3, DXE3, CBXE4, DXE4, CBXE5, DXE5, CBXE6, DXE6, CBXE7, DXE7, CBXE8, DXE8, C10, D10
WSC4D features include:Can control any serial device connected to the serial port. Can be used from GUI mode or console mode programs. Can control multiple ports simultaneously. Is fully thread safe.Is port re-entrant.State driven Xmodem and Ymodem on multiple ports simultaneously. Can send Windows messages on completion of events (incoming character, etc.) Includes 16-bit (WSC16.DLL) and 32-bit (WSC32.DLL) versions.Does not depend on support libraries. Makes calls to Windows API functions only. Can also use with C/C++, Visual C++, .NET, Visual Basic (VB.NET), Visual FoxPro, Visual dBase, PowerBASIC, Xbase++, and COBOL.Supports Windows 95/98/Me/NT/2000/XP. Informations Status: Evaluation (time-limit)Source: On purchase/registrationprice: $105Source price: $185Size: 392kB Platforms: D1, D2, D2005, D2006, D3, D4, D5, D6, D7
Use ZylSerialPortAX control to easily communicate with external devices on serial port connection, such as modems, bar code readers, GSM modules and others.The demo version is fully functional. The package includes demo programs to show how ZylSerialPortAX works and a help file with the description of the component. Informations Status: With Nag-ScreenSource: Noneprice: $39.99Size: 600kB Platforms: C2k10, C2k6, C2k7, C2k9, CB5, CB6, CBXE, D2005, D2006, D2007, D2009, D2010, D4, D5, D6, D7, DXE
This program is a tool for every developer and programmer. With this program you will be able to change serial port settings without the need to close and re-open the serial port, adjust baudrate, databits, parity, stop bits, flow control parameters; save all received bytes into a file for later analysis and lots more. 2b1af7f3a8